Connection Module Cat. 6A, 1xRJ45/s, Snap-in, grey, 100x (R509507)

Connection Module Cat. 6A, 1xRJ45/s, Snap-in, grey, 100x (R509507)

The module for the highest standards. Guarantees the best performance reserves for 10G Ethernet cabling and beyond.

Артикул: R509507 Категорія:

The R&M
freenet
Cat. 6
A
shielded connection modules, part of the Advanced cabling system, are ideal for voice, fast data transmissions and high bandwidth applications. This high-performance Cat. 6
Amodule is perfect for use in 10 Gigabit Ethernet (10GBASE-T) and future high-speed applications to 500 MHz. Together with Cat.7A installation cables with AWG22 it is «25G Ready» according to TR11801-9905 and allows for 25GBase-T transmission up to 30m.

Scope of supply

  • RJ45 Cat. 6
    AISO connection module, shielded

  • Snap-in adapter

  • EMC cover

  • Dust cover

  • Cable tie

  • Installation instructions

Mechanical Data

Color

silver / red

Technical Data

Category connector (A)

Cat. 6A ISO «25G Ready»

Connector type (A)

RJ45

Shielding connector (A)

shielded

PoE

Yes

Connector class

connection module

Wiring diagram

T568A and T568B

Holder for connector / module

Snap-in

Poles

8

Standard

IEC 60603-7-51: Electrical Characteristics of the Telecommunication Outlets

UL Listed

ISO/IEC 11801

EN 50173-1

ISO/IEC TR11801-9905

RJ45 connection module of Cat. 6
A
ISO, for the setting up of transmission channels of Class E
A
with up to 4 plugged connections acc. to ISO/IEC 11801, EN 50173-1, (DIN EN 50173-1) and Class F on 2 pairs, complies with Cat. 6
A
requirements of the standards ISO/IEC 11801, EN 50173-1, as well the U.S. standard Cat. 6
Aaccording to TIA/EIA 568.2-D, re-embedded tested in acc. with IEC 60603-7-51 and 60512-27-100, interoperable and backwards compatible with Category 6 and Category 5e.

Suitable for 10GBASE-T applications in acc. with IEEE 802.3™ Section Four up to 500 MHz and 100 m.

Tested in line with R&M's manufacturing control, performing 100% inspection.

Compatible with RJ standard plugs (RJ11, RJ12, RJ45), connection with automatic wire cutting of installation cables AWG 26 – 22 (0.4 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7 without special tools. X-Separator for individual pair shielding. Parallel pair termination without crossover in acc. with TIA 568-A/B, gold-plated bronze contacts for >1000 mating cycles, IDC contacts with >20 insertion cycles, contact resistance <5 mOhm, dielectric strength >1000 Veff. Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002. 90° wire orientation without bending cable. With integral cable strain relief, including dust cover. Shield contacting by patented shield lance with integral cable strain relief, shield material tin-coated bronze, ground contacting through 1 contact finger for flat connectors 4.8 x 0.5 mm.

Material: halogen-free and heavy-metal free in acc. with EU directives RoHS 2.

Connection module Cat. 6
AISO, shielded, with EMC cover, dust cover, snap-in frame (gray), cable tie and installation instructions.

Інструкції з встановлення

Завантажити

Маєте питання щодо товару, звертайтесь до нас:


+380 44 2111900
info@synergia.ua

earthmagnifiercrossmenuchevron-right